Restorer Gallon

• Floor Finish Cleaner and Restorer- Restorer is the new generation cleaner/restorer that provides unequalled results on all types of hard and resilient floor surfaces. It was designed to be used with Newline Industries floor care products but can be used in any

high-speed program to achieve wet look floors. Restorer cleans and prepares surfaces for buffing/burnishing with a brilliant gloss. When used, it will reduce the amount of recoating in maintenance programs for that wet looking floor.

Directions for Use: Always prepare the floor by dust mopping with a clean untreated dust mop. Mop-On Application: Dilute Restorer 1-2 ounces per gallon. Mop entire area to be buffed/burnished. Use care to avoid build-up in corners or edges. Let

Restorer dry to the touch and then buff/burnish floor with desired pad and equipment. Mop-on application of Restorer is recommended 1-2 times per week. Newline Industries Neutral Cleaner should be used the other times.

Automatic Scrubber Application: Dilute Restorer 1-2 ounces per gallon. Clean floor using appropriate pads on auto scrubber. Buff/burnish floor using appropriate pads. If buffing/burnishing daily, use Restorer ½ -1 ounce per gallon.

Scrub and Recoat Application: Dilute Restorer 2-6 ounces per gallon of water. Apply diluted Restorer at a rate of 300 square feet per gallon. Scrub floor with red, green, or blue pads. Extract dirty solution and rinse with clean water.

Recoat floor following manufacturer’s directions. For best results, buff/burnish floor prior to recoating with Newline Industries Supreme or New Shine floor finishes.

MSDS SHEET