Basic Coatings Squeaky Concentrate Gal

Basic Squeaky Cleaner Commercial Concentrate cleans hardwood floors without the residue left behind by other detergents. Squeaky is recommended for cleaning prior to recoating, as well as for general maintenance cleaning of wood floors. Squeaky is also ideal for cleaning laminate floors and is the second cleaning step of the TyKote® Dustless Recoating System.

DIRECTIONS FOR USE
1. Sweep or vacuum the wood floor.
2. Mix one part Squeaky to four parts water. 

3. Squeaky can then be transferred into a spray bottle for spot cleaning. To spot clean, spray Squeaky on a Basic Microfiber Mop and wipe the surface clean.
4. For large surfaces, mix Squeaky in a bucket using the recommended dilution ratio. Soak several large towels in the solution, making sure they are thoroughly wet. Wring out the towels to remove excess moisture. Wrap a towel around a push broom and tack the floor. To prevent redeposit of dirt and oil, refold towel using clean sides as needed. Pay special attention to corners. Repeat the procedure in each area of the floor until the entire floor has been cleaned.
5. If using an automatic scrubber, use a dilution rate of 1 part Squeaky to 4 parts water using a white or red pad. Make sure squeegees and buffing/polishing pads work well. A person with a mop must follow behind the scrubber to pick up any water that is not picked up from the machine. Pay special attention to corners. Do not pour Squeaky directly on the wood floor. Excess liquid on any hardwood floor may damage the fibers. Do not use this product with any waxfinished floors.

MSDS